Download TDS
084 Falco Spray Plaster finish coat(application/pdf)
Color Palatte
Falco Spray Plaster Finish Coat
0,00 د.إ
Finish Coat product is based on Acrylic copolymer ready to use water base product. It is environmentally friendly providing smooth surface or in a variety of amazing decorative textured. It can be applied directly to either new or old solid surfaces of pre-cast concrete, fair-face and level brick work.
Description
Product Description
Finish Coat product is based on Acrylic copolymer ready to use water base product. It is environmentally friendly providing smooth surface or in a variety of amazing decorative textured. It can be applied directly to either new or old solid surfaces of pre-cast concrete, fair-face and level brick work.
Recommended Usage
To be used on concrete, precast, plaster, polystyrene and blocked surfaces for internal ceilings, External car park ceiling, Balcony ceiling and basement concrete wall only.
Surface Preparation
The surface must be clean, dry and free from dust, oil, grease and any contaminations.
Tools
Spatula or scrubber.
Application System
CONCRETE CEILINGS
1. Apply one coat of Falco Spray Plaster Base Coat at the joints.
2. Apply two coats of Falco Spray Plaster Finish Coat and level with a steel edged spatula.
3. Apply one coat of Falco Spray Plaster Finish Coat texture finish (if required).
BLOCKED CEILINGS (HOURDY)
1. Apply one coat of Falco Spray Plaster Base Coat at the block.
2. Apply one coat of Falco Spray Plaster Base Coat to get level smooth surface.
3. Apply two coats of Falco Spray Plaster Finish Coat and level with a steel edged spatula.
4. Apply one coat Falco Spray Plaster Finish Coat texture finish (if required).
PRECAST CEILINGS
1. Apply one coat of Falco Spray Plaster Base Coat at the joints and fix fiberglass mesh over it.
2. Apply one coat of Falco Spray Plaster Base Coat to get level smooth surface.
3. Apply two coats Falco Spray Plaster Finish Coat and level with a steel edged spatula.
4. Apply one coat of Falco Spray Plaster Finish Coat texture finish (if required).
POLYSTYRENE CEILINGS
1. Apply one coat of Falco Spray Plaster Base Coat at the joints.
2. Fix fiberglass mesh.
3. Apply one coat of Falco Spray Plaster Base Coat to get a suitable level.
4. Apply two coats of Falco Spray Plaster Finish Coat and level with a steel edged spatula.
5. Apply one coat of Falco Spray Plaster Finish Coat texture finish (if required).
Related products
-
Falco Acrylic Primer
0,00 د.إ Falco Acrylic Primer is based on acrylic copolymer water based product with…- Alkali ResistanceHighly PenetrationLow VOC
Falco Stucco Heritage Putty
0,00 د.إ Falco Stucco heritage putty is a special kind of water based colored…- Highly AdhesionEnhanced System ThicknessLow VOC
Gulf Shield Tex Primer
0,00 د.إ Gulf Shield Tex Primer is a light textured primer coat based on…- Alkali ResistanceHighly PenetrationLow VOC
Falco Silicon Primer
0,00 د.إ Falco Silicon Primer is based on a special silicon binder water based…- Alkali ResistanceHighly PenetrationLow VOC