info@gulfpaints.com
+971 3 7212 888

Home › Products › Professionals Products › Alkyds › Falco Lux Matt Enamel
Falco Lux Matt Enamel
Download TDS
019 Falco Lux Matt Enamel

(application/pdf)

Color Palatte

Falco Lux Matt Enamel

0,00 د.إ

Falco Lux Matt Enamel is based on a special matt synthetic alkyd resin and light fast pigments product. It is provide maximum yellowing resistance and optimum hiding power with excellent weathering resistance and color retention properties.

Size & Quantity
Calculation Use Paint Calculator

Description

Product Description
Falco Lux Matt Enamel is based on a special matt synthetic alkyd resin and light fast pigments product. It is provide maximum yellowing resistance and optimum hiding power with excellent weathering resistance and color retention properties.

Recommended Usage
To be used for interior and exterior surfaces such as concrete, plaster gypsum board wood and steel works.

 

Additional information

Finish

, , ,

Surface Preparation
The surface must be clean, dry and free from dust, oil, grease and any contaminations.

Tools
Brush, roller or spray

Spray Data
Pressure at nozzle : 150 kg/cm2 (2100 PSI)
Nozzle tip (inches) : 0.013 – 0.021
Spray Angle : 65o – 80o
Filter : be sure that the filters are clean.

Application Method
Apply two coats of Falco Lux Matt Enamel (top coat) by brush, roller and spray thinned with Thinner 1000 (10-15% by volume).

Recommended paint system for interior concrete:
• Falco sealer Primer or Acrylic Emulsion Primer –  1 coat
• Falco Stucco Putty – 2 coats
• Falco Lux Matt Enamel –  2 coats

Recommended paint system for steel works:
• Falco Red Oxide Primer –  1 coat
• Falco Lux Matt Enamel  – 2 coats

Recommended paint system for wood works:
• Falco Wood Primer  – 1 coat
• Falco Stucco Putty (interior only)  – 2 coats
• Falco Lux Matt Enamel – 2 coats

Note: paint system may be varying according to the substrate.

Related products